Autel EV Chargers Official Website

Autel AC Elite Home 50A EV Charger | 12kW Level 2 Home Charging

$508.00 USD

~~$635.00 USD~~ $508.00 USD

Sale Sold out

Shipping calculated at checkout.

Holster In-body Holster Separate Holster

Color Dark Gray Silver

Wiring Hardwired

Autel AC Elite Home 50A EV Charger is a Level 2 home EV charger with a standard U.S. Level 2 connector, built for fast overnight charging at home. At 50A it delivers about 12.0 kW, which is roughly 36–45 miles of range for every hour plugged in, so most drivers wake up to a full battery.

Autel AC Elite Home 50A EV Charger: Key Specs

Charging level	Level 2 (240V AC)
Max output	Up to 50A
Approx. power	About 12.0 kW at 50A
Range added	Roughly 36–45 miles per hour of charging*
Connector	Standard U.S. Level 2 plug (J1772 or NACS; confirm on the listing)
Installation	Hardwired to a dedicated 240V circuit (70A double-pole breaker)
Connectivity	Bluetooth, Wi-Fi, Ethernet, CAN and RS485
App control	Schedule and monitor charging from the Autel app
Holster	In-body or separate holster versions

*Range per hour depends on your vehicle's efficiency and onboard charger limit.

Why Choose This Charger

Much faster than a wall outlet: Level 2 charging is several times faster than Level 1 (120V), which adds only about 3–5 miles per hour.
Standard U.S. connector: plugs straight into compatible vehicles with no adapter.
Permanent hardwired install: clean, permanent setup with full rated current.
Connectivity: Bluetooth, Wi-Fi, Ethernet, CAN and RS485
App control: Schedule and monitor charging from the Autel app
Holster: In-body or separate holster versions

Compatible Vehicles

Every EV sold in the U.S. can charge on Level 2: J1772-port EVs (Chevy, Ford, Hyundai, Kia, Nissan, Rivian, VW and more) plug in directly with a J1772 connector, while Teslas and 2025-and-newer NACS EVs use a NACS connector or an adapter. Check the connector shown on this listing before you order. Always check your vehicle's maximum AC charging rate; a car with an 11 kW onboard charger will not charge faster than that, even on a higher-rated charger.

Installation Requirements

This charger is hardwired, so it connects directly to a dedicated 240V circuit. For 50A charging, EV charging rules call for a 70A breaker (125% of the charging current) and correctly sized copper wire. Hardwiring avoids outlet wear, allows the full 50A, and suits indoor or outdoor garage installs. Have a licensed electrician check your panel capacity, pull any required permit and install it.

New to home charging? Read our Level 2 EV charger installation guide and typical installation costs.